mBot Level 2

Class Projects

LED Matrix Panel

Code mBot to give a message

 Engineering Notebook Entry #4

TIPS:
  • Check the port numbers. Make sure the ports being used on the robot match the ports in your code.
  • Unplug unnecessary sensors if they aren't being used for this sequence of code.

Project Name/Date: ___________

 

Focus Piece: LED Matrix Panel

Objective: Code the LED panel to give a personalized message before and after the soccer ball race.

Something I learned is _____________

 

One challenge I had is _____________

I overcame the challenge by ________

One question I have is _____________

Build a "Range Finder"

TIPS:
  • Check the port numbers. Make sure the ports being used on the robot match the ports in your code.
  • Test sensors individually if they aren't working as expected.

 Engineering Notebook Entry #3

Project Name/Date: ___________

 

Focus Piece: LED Matrix Panel

Objective: Code mBot to detect objects and report their distance in centimeters.

Something I learned is _____________

 

One challenge I had is _____________

I overcame the challenge by ________

One question I have is _____________

ADD a Forever Loop

ADD an Alarm

Put the codes together

 Engineering Notebook Entry #2

Project Name/Date: ___________

 

Focus Piece: Line-Follower Sensor

Objective: Add an alarm to your Personal Fan. It will sounds when the robot is picked up.

Something I learned is _____________

 

One challenge I had is _____________

I overcame the challenge by ________

One question I have is _____________

TIPS:
  • Make sure the Line-follower sensor bulbs are facing a light/white surface.
  • Test sensors individually if they aren't working as expected.
  • Make sure the Ultrasonic sensor is facing a dark object to allow the fan to activate.
  • Finally, make sure all the sensors are plugged into the correct ports.

Code a Personal Fan

Engineering Notebook Entry #1

Project Name/Date: ___________

 

Focus Piece: Ultrasonic Sensor

Objective: Code the robot to activate a Personal Fan when it senses an object close by

Something I learned is _____________

 

One challenge I had is _____________

I overcame the challenge by ________

One question I have is _____________

TIPS:
Wondering where to find the "Fan" Blocks?
  • Go to the blocks menu on the mBlock app and scroll to the bottom
  • Find the "Extensions" button under the pink "My Blocks" section
  • Make sure you're on Device Extensions and find "Sensing Gizmos"
  • Click Add+
  • Now you will see a new (dark green) section of coding blocks which includes the Fan blocks.

FEATURED ON

  • Instagram Social Icon
  • Facebook Social Icon
  • Twitter Social Icon
Solar Logo Sep 18.JPG
Screen Shot 2019-10-10 at 12.15.06 PM.pn
Screen Shot 2019-10-10 at 2.08.08 PM.png
Screen Shot 2019-10-29 at 10.46.39 PM.pn

© 2019-2020 by SoLA Robotics.  All Rights Reserved.